More Tips To Save On Your Utility Bill

Remove Debris

On the outside condenser/compressor, remove the fan cage. Using a screwdriver or wrench, get rid of the fasteners and raise the cage or fan grill far from the top of the system. By hand, or with a wet/dry vacuum, clean leaves and other debris from the interior.

Clean The Fins

With a strong stream from a garden tube, spray through the fins from the inside out to blast any built up dirt or particles from in between them. Never ever use a pressure washer, since the pressure can harm the fins. If the fins are especially dirty, use a commercially readily available fin cleansing spray.

This is an extended post from our main Air Conditioning page on our website.

Straighten The Fins

Since any reduction in airflow through the fins can reduce efficiency, thoroughly correct bent finsusing a butter knife or commercially availablefin-straightening tool. Be mild so that the tubing ingrained within the fins is not harmed.

Clean Area Around The Unit

As soon as finished with the cleansing, change the fancage. Rake back leaves and particles outside the condenser and cutdown branches and plants at least 2 feetin all instructions to guarantee appropriate air flow around the system.

During cold weather when the condenser is not in use, it's excellentto cover the top of the unit with a piece of plywood or plastic to keep particles from falling in. Nevertheless, do not entirely cover the unit's sides, considering thatmoisture can develop inside and trigger corrosion. Also, a totally covered unit encourages vermin to build nests within.Remove any cover when the unit is running.